4 1
BIOS Setup
Peripheral Configuration
PhoenixBIOS Setup Utility
Peripheral Configuration
Item Specific Help
Serial Port A
[Enabled]
Base I/O address/IRQ
[3F8/IRQ4]
Serial Port B
[Enabled]
Base I/O address/IRQ
[2F8/IRQ3]
Floppy disk controller
[Enabled]
Floppy Check
[Enabled]
Parallel ATA
[Both]
Serial ATA
[Enabled]
Native Mode Operation
[Auto]
F1: Help
KL
: Select Item
+ -: Change Values
F5: Setup Defaults
Esc: Exit
IJ
: Select Menu
Enter: Select Sub-Menu
F10: Save&Exit
Serial Port A
This allows users to configure serial prot A by using this option.
Disabled
Disable the configuration.
Enabled
Enable the configuration (Default value)
Base I/O Address/IRQ
3F8/IRQ4
Set IO address to 3F8. (Default value)
2F8/IRQ3
Set IO address to 2F8.
3E8/IRQ4
Set IO address to 3E8.
2E8/IRQ3
Set IO address to 2E8.
Figure 2-4: Peripheral Configuration
