2
(Optional) Quick Start for SNMP Management
4.
Use the null-modem cable to connect the Console port to a COM port on a
workstation.
5.
Open a terminal emulation program (such as HyperTerminal in Microsoft
Windows* 95). Use these communication parameters:
•
9600 baud
•
8 data bits
•
No parity
•
1 stop bit
•
Xon/Xoff flow control
6.
Press
E
and log into the Console Manager:
Login:
password:
By default, no password or user name is assigned. If you enter one, it’s saved upon reset.
7.
Set the IP configuration using the
set-ip-conf
command:
set-ip-conf 192.1.1.64 255.255.255.0 192.1.1.255
E
Replace these addresses with the numbers for your network. Specify the IP address, netmask
(subnet mask), and broadcast address (default gateway), in that order.
8.
Download the Intel MIB (Management Information Base) file from an Intel online
service and compile it into your NMS.
The MIB filename is SWCH2MIB.EXE. You can find the file on Intel’s Customer Support web
site (http://support.intel.com) or the Intel BBS (Host: ftp.intel.com, Directory: pub/support/
enduser_reseller). See your NMS documentation for instructions on compiling the MIB for a
new device.
A null-modem cable is
provided with the switch.
IP address netmask broadcast address
