Development Kit User’s Guide
October 2008
Order Number: 320067-002US
59
Platform Setup—Intel
®
EP80579 Integrated Processor with Intel
®
QuickAssist Technology
6.1.3
Installing Memory
The reference kit includes one 1 GB DDR2-800 DIMM. Use the following procedure to
install the DIMM:
1. Ensure the tabs on the slot are open or rotated outward from the slot.
2. Line up the first DIMM above the DIMM 0 socket (the DIMM is keyed so that it only
fits in the slot in one orientation). The DIMM 0 socket is the furthest DIMM socket
from the processor. See
Figure 20
.
3. Firmly, but carefully insert the DIMM into the slot until the tabs close.
Note:
If only a single DIMM is used, always install it in the DIMM 0 socket.
Caution:
Do NOT bend the board when installing the memory. Several components are located
near the memory slots, and excessive board flex may lead to solder joint failure.
Figure 19.
Close-up of Connection SATA Port 0
Figure 20.
Memory Installation - 1 GB DDR-800 DIMM in DIMM 0 Socket
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
