Advanced Admin Guide
Intel® Education Content Access Point
User Manual
January 2015
36
Document Number: 331819-001EN
5.6
Wireless settings
Configure the wireless access point and an access control list. (See Figure 40.)
5.6.1
Wireless access point
Enter the
SSID
Name
. The default SSID is
WRTD-303N_xxxxxx
, where “xxxxxx” is the last six digits of the
Wi-Fi MAC address (WFM), which is printed on the bottom of the device. For example, for a device with a
WFM of F835DD
85457A
, the wireless SSID is
WRTD-303N_85457A
.
Select the
Wireless
Mode
. Default is 802.11 b/g/n mixed – 2.4 GHz.
Select the
Wireless
Channel
. Default is Auto, which means the optimal channel is determined.
Select the
Bandwidth
Channel
. Default is 20 MHz.
TIP!
40/20 MHz is for 802.11 n/ac and 80/40/20 MHz is for 802.11ac only.
Select the
Extension
Channel
direction (lower or upper) for the channel bonding.
TIP!
This option is not configurable if the
Wireless Channel
is set to Auto and
Bandwidth Channel
is
20 MHz.
Set
Anti-Interference Mode
. Default is Off. To improve wireless performance in a noisy environment, set
this mode to On.
Select Security Mode.
a.
Default is
Open
.
b.
If
WEP
is selected, configure the following:
Authentication Type: Select the authentication type.
Default Transmission Key: Set selected key as the default key to use.
WEP Key Type: Select the encryption type.
Passphrase: Enter a passphrase and click the
Generate
button, which will generate the four WEP
keys below.
c.
If
WPA/WPA2
is selected, configure the following:
Encryption Type: Select the data encryption algorithm.
Passphrase: Enter the passphrase.
Click
Save
.
5.6.2
Access control list
Set the maximum number of clients that can connect simultaneously with
User
Limit
. Default is 0, which
means no limit.
Access control configuration:
a.
By default,
No MAC Filtering
is selected.
b.
To whitelist (allow): Select
Allow only the following MAC addresses to connect
.
c.
To blacklist (don’t allow): Select
Prevent the following MAC address to connect
.
d.
Enter each MAC address in the
MAC
Ad
dress field and click
Add
.
Click
Save
.
