
Technical Reference
59
2.3
Jumper Block
CAUTION
Do not move the jumper with the power on. Always turn off the power and unplug the
power cord from the computer before changing a jumper setting. Otherwise, the board
could be damaged.
Figure 16 shows the location of the jumper block. The 3-pin jumper block determines
the BIOS Setup program’s mode. Table 33 describes the jumper settings for the three
modes: normal, configure, and recovery. When the jumper is set to configure mode
and the computer is powered-up, the BIOS compares the processor version and the
microcode version in the BIOS and reports if the two match.
Figure 16. Location of the Jumper Block
Summary of Contents for DZ77BH-55K
Page 4: ...Intel Desktop Board DZ77BH 55K Technical Product Specification iv...
Page 68: ...Intel Desktop Board DZ77BH 55K Technical Product Specification 68...
Page 78: ...Intel Desktop Board DZ77BH 55K Technical Product Specification 78...
Page 100: ...Intel Desktop Board DZ77BH 55K Technical Product Specification 100...