Intel DDR266 (PC2100) User Manual Download Page 17

Page: 17 / 96

.A=JKHAI

Page 2-3

- In 2-CH mode, supports Line-In (Blue), Line-Out (Green) and Mic-In

(Pink) at rear panel

- In 6-CH mode, supports Rear speaker out (Blue), Front speaker out

(Green) and Center&Subwoofer speaker out (Pink) at rear panel

- Supports CD-In, Aux-In and S/PDIF-In/out interface
- Supports Line-out and Mic-In for front panel

Peripheral Interfaces

PS/2 keyboard and mouse ports (at rear panel)

One

Parallel (printer) port (at rear panel)

Two

Serial ports (1 at rear panel)

Eight

USB2.0 ports (4 at rear panel)

One

RJ45 LAN connector (at rear panel)(Optional)

One

game port

One

floppy drive interface

Two

IDE interfaces

Two

IDE&RAID interfaces (Optional)

Three

1394 interface (Optional)

Four

Serial ATA interface (2 for Optional)

Three

Fan connectors

Front Panel Controller

Supports Reset & Soft-Off switches

Supports HDD & Power LEDs

Supports PC speaker

Expansion Slots

One

AGP slots supporting 1.5v

4X/8X

AGP card

- AGP v3.0 compliant

Five

PCI bus sockets

with Bus Master support

- PCI v2.3 compliant

Summary of Contents for DDR266 (PC2100)

































































































Search results

Summary of Contents for DDR266 (PC2100)

Reviews:

Related manuals for DDR266 (PC2100)

Brands by name

Popular brands

Intel DDR266 (PC2100), User Manual

Search results

Summary of Contents for DDR266 (PC2100)

Reviews:

Related manuals for DDR266 (PC2100)

Brands by name

Popular brands