Intel NUC Kit DC3217IYE User Guide
3
This guide tells you how to:
•
Install and remove memory
•
Install a wireless card
•
Install an mSATA SSD
•
Install a VESA mount bracket
•
Install an operating system
•
Install the latest drivers
Open the Intel NUC Chassis
To open the Intel NUC chassis, follow these steps:
1.
Unscrew the four corner screws on the bottom cover of the chassis and lift the cover.
Installing and Removing Memory
Intel NUC Kit DC3217IYE has two 204-pin SO-DIMM sockets. Memory requirements:
1.5V DDR3 or 1.35V DDR3L (low voltage) memory
1333 MHz or 1600 MHz SO-DIMMs
Non-ECC
For a list of tested memory, go to the
System Memory
page on the Support site:
Install SO-DIMMs
If you plan to install just one SO-DIMM, install it in the lower memory socket.
To install the SO-DIMMs, follow these steps:
1.
Observe the precautions in "Before You Begin" on page 2.
