Product Description
21
1.5 Intel
®
945P Chipset
The Intel 945P chipset consists of the following devices:
•
Intel 82945P Memory Controller Hub (MCH) with Direct Media Interface (DMI) interconnect
•
Intel 82801G I/O Controller Hub (ICH7) with DMI interconnect
The MCH component provides interfaces to the CPU, memory, PCI Express, and the DMI
interconnect. The ICH7 is a centralized controller for the board’s I/O paths.
For information about
Refer to
The Intel 945P chipset
http://developer.intel.com/
Resources used by the chipset
Chapter 2
1.5.1 USB
The board supports up to eight USB 2.0 ports, supports UHCI and EHCI, and uses UHCI- and
EHCI-compatible drivers.
The ICH7 provides the USB controller for all ports. The port arrangement is as follows:
•
Four ports are implemented with dual stacked back panel connectors adjacent to the audio
connectors
•
Four ports are routed to two separate front panel USB connectors
NOTE
Computer systems that have an unshielded cable attached to a USB port may not meet FCC
Class B requirements, even if no device is attached to the cable. Use shielded cable that meets the
requirements for full-speed devices.
For information about
Refer to
The location of the USB connectors on the back panel
Figure 15, page 49
The location of the front panel USB connectors
Figure 16, page 50
