Intel BX80569Q9550 - Core 2 Quad 2.83 GHz Processor Page 41 Datasheet Download

Page: 41 / 172

Intel

Itanium

Processor 9300 Series and 9500 Series Datasheet

Electrical Specifications

2. These voltages are target only. A variable voltage source should exist on systems in the event that a different voltage is required.

See Ararat Voltage Regulator Module Design Guide for more information.

3. Uncore, Core, and Cache voltage and Current Rating are at the Package Pad.

4. The voltage specification requirements are measured across the VCCCORESENSE and VSSCORESENSE pins using an oscilloscope

set to a 100 MHz bandwidth and probes that are 1.5 pF maximum capacitance and 1 MOhm minimum impedance at the processor

socket. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the system is

not coupled into the scope probe.

5. The voltage specification requirements are measured across the VCCCACHESENSE and VSSCACHESENSE pins using an

oscilloscope set to a 100 MHz bandwidth and probes that are 1.5 pF maximum capacitance and 1 mOhms minimum impedance

at the processor socket. The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from

the system is not coupled into the scope probe.

6. Warm boot reset, only in downward direction.

7. Min and Max range is spec at the die for both VCCIO. This range includes 50 mV p-p AC noise. It also includes any DC and AC

tolerances at package pin.

8. The FMB remote sense tolerance is ±2.5% for DC to 20 MHz at the package, where ±1.5% is allotted for a DC to 1 MHz range

and an additional ±1% for 1 MHz to 20 MHz. Similarly, ±6.4% is allotted for DC to 20 MHz at the die. It is expected that VCCIO

regulators meet ±1.5% at the remote sense location based on the general remote sense termination point location as described

Figure 2-16

, VR Sense Point (Representation). For future processor compatibility, it is strongly recommended that the platform

query the PIROM to assure VCCIO is set to the appropriate level prior to powering up the VCCIO supply.

9. All voltage regulation measurements taken at remote sense termination points.

10.For peak-to-peak Ripple and Noise (R&N) measured with full bandwidth (BW) of the scope (Min 1 GHz BW scope is required):

set scope diff probe and the scope at full BW (capture waveform A, channel 1).

11.For peak-to-peak Ripple and Noise (R&N) measured above 1 MHz:

Step 1 = set both: scope diff probe and/or the scope at 1 MHz BW limit (capture waveform B, channel 2).

Step 2 = calculate A-B (use scope Math function: subtract channel 1 - channel 2).

Table 2-16. FMB 130W Current Specifications for the Intel

Itanium

Processor 9300

Series

Symbol

Parameter

Max

Units

Notes

CC_CORE

for core

151

CC_CORE_TDC

Thermal Design Current for Core

100

Notes:

1. ICC_CORE_TDC is the sustained (DC equivalent) current that the processor core is capable of drawing indefinitely and should be

used for the Ararat voltage regulator temperature assessment. The Ararat voltage regulator is responsible for monitoring its

temperature and asserting the VR_FAN_N, VR_THERMALERT_N, VR_THERMTRIP_N signals sequentially to inform the processor

and platform of a thermal excursion. Of the three signals, only VR_THERMALTERT_N is monitored by the processor. Please see

the Ararat Voltage Regulator Module Design Guide for further details. The processor is capable of drawing ICC_CORE_TDC

indefinitely. Refer to

Figure 2-9

for further details on the average processor current draw over various time durations. This

parameter is based on design characterization and is not tested.

CC_CORE_STEP

Max Load step for core

2. During system power on, the pulse inrush (ICC_CORE_STEP) can be as high as 130A peak-to-peak.

ICC_CORE/dt

Slew rate for core at Ararat output

154

A/us

CC_UNCORE

ICC for uncore

CC_UNCORE_TDC

Thermal Design Current for Uncore

3. ICC_UNCORE_TDC is the sustained (DC equivalent) current that the processor uncore is capable of drawing indefinitely and

should be used for the Ararat voltage regulator temperature assessment. The Ararat voltage regulator is responsible for

monitoring its temperature and asserting the VR_FAN_N, VR_THERMALERT_N, VR_THERMTRIP_N signals sequentially to inform

the processor and platform of a thermal excursion. Of the three signals, only VR_THERMALTERT_N is monitored by the processor.

Please see the Ararat Voltage Regulator Module Design Guide for further details. The processor is capable of drawing

ICC_UNCORE_TDC indefinitely. This parameter is based on design characterization and is not tested.

CC_UNCORE_STEP

Max Load step for uncore

4. During system power on, the pulse inrush (ICC_UNCORE_STEP) can be as high as 40A peak-to-peak.

CC_UNCORE/dt

Slew rate for uncore at Ararat output

A/us

CC_IO

ICC for processor I/O

5. The ICC_IO current specification applies to the total current from VCCIO pins.

CC_Analog

ICC for processor Analog

CC33_SM

ICC33 for main supply

200

Summary of Contents for BX80569Q9550 - Core 2 Quad 2.83 GHz Processor













































































































































































Search results

Summary of Contents for BX80569Q9550 - Core 2 Quad 2.83 GHz Processor

Reviews:

Related manuals for BX80569Q9550 - Core 2 Quad 2.83 GHz Processor

Brands by name

Popular brands

Intel BX80569Q9550 - Core 2 Quad 2.83 GHz Processor, Datasheet

Search results

Summary of Contents for BX80569Q9550 - Core 2 Quad 2.83 GHz Processor

Reviews:

Related manuals for BX80569Q9550 - Core 2 Quad 2.83 GHz Processor

Brands by name

Popular brands