Intel Desktop Board DP43TF Product Guide
38
7.
Insert the bottom edge of the DIMM into the socket.
8.
When the DIMM is inserted, push down on the top edge of the DIMM until the
retaining clips snap into place. Make sure the clips are firmly in place.
9.
Replace the computer’s cover and reconnect the AC power cord.
Removing DIMMs
To remove a DIMM, follow these steps:
1.
Observe the precautions in "Before You Begin" on page 25.
2.
Turn off all peripheral devices connected to the computer. Turn off the computer.
3.
Remove the AC power cord from the computer.
4.
Remove the computer’s cover.
5.
Gently spread the retaining clips at each end of the DIMM socket. The DIMM pops
out of the socket.
6.
Hold the DIMM by the edges, lift it away from the socket, and store it in an
anti-static package.
7.
Reinstall and reconnect any parts you removed or disconnected to reach the DIMM
sockets.
8.
Replace the computer’s cover and reconnect the AC power cord.
Installing and Removing a PCI Express x16
Card
CAUTION
When installing a PCI Express x16 card on the Desktop Board, ensure that the card is
fully seated in the PCI Express x16 connector before you power on the system. If the
card is not fully seated in the PCI Express connector, an electrical short may result
across the PCI Express connector pins. Depending on the over-current protection of
the power supply, certain Desktop Board components and/or traces may be damaged.
Summary of Contents for boxdp43tf
Page 1: ...Intel Desktop Board DP43TF Product Guide Order Number E40798 001...
Page 24: ...Intel Desktop Board DP43TF Product Guide 24...
Page 42: ...Intel Desktop Board DP43TF Product Guide 42 Figure 20 Connecting the IDE Cable...
Page 57: ...Installing and Replacing Desktop Board Components 57...
