Intel BOXDG43GT Product Manual Download Page 78

Intel Desktop Board DG43GT Product Guide 

78 

EMC Regulations 

Intel Desktop Board DG43GT complies with the EMC regulations stated in Table 22 
when correctly installed in a compatible host system. 

Table 22. EMC Regulations 

Regulation (Class B) 

Title 

FCC 47 CFR Part 15, 
Subpart B 

Title 47 of the Code of Federal Regulations, Part 15, Subpart B, 
Radio Frequency Devices.  (USA)   

ICES-003 Issue 4  

Interference-Causing Equipment Standard, Digital Apparatus.  
(Canada)   

EN55022:2006  

Limits and methods of measurement of Radio Interference 
Characteristics of Information Technology Equipment.  (European 
Union)   

EN55024:1998 

Information Technology Equipment – Immunity Characteristics 
Limits and methods of measurement.  (European Union)   

EN55022:2006 

Australian Communications Authority, Standard for 
Electromagnetic Compatibility.  (Australia and New Zealand) 

CISPR 22:2005 
+A1:2005 +A2:2006 

Limits and methods of measurement of Radio Disturbance 
Characteristics of Information Technology Equipment.  
(International)  

CISPR 24:1997 
+A1:2001 +A2:2002 

Information Technology Equipment – Immunity Characteristics – 
Limits and Methods of Measurement.  (International) 

VCCI V-3/2007.04, 
V-4/2007.04 

Voluntary Control for Interference by Information Technology  
Equipment.  (Japan)   

KN-22, KN-24 

Korean Communications Commission – Framework Act on 
Telecommunications and Radio Waves Act.  (South Korea)  

CNS 13438:2006 

Bureau of Standards, Metrology and Inspection.  (Taiwan)   

 

Japanese Kanji statement translation:  This is a Class B product based on the standard 
of the Voluntary Control Council for Interference from Information Technology 
Equipment (VCCI).  If this is used near a radio or television receiver in a domestic 
environment, it may cause radio interference.  Install and use the equipment 
according to the instruction manual. 

 

Summary of Contents for BOXDG43GT



















































































Reviews: