Intel BLKDQ57TM Specification Download Page 29

Product Description 

 29

 

 

 

Remote troubleshooting and recovery that can significantly reduce desk-side visits 
and potentially increasing efficiency of IT technical staff. 

 

System event log 

 

IDE Redirection (IDE-R) or PXE boot: remote CD or network drive boot 

 

Serial over LAN 

 

OOB diagnostics 

 

Remote control  

 

Operating system repair 

 

Proactive alerting that decreases downtime and minimizes time to repair. 

 

Programmable policies 

 

Operating system lock-up alert 

 

Boot failure alert 

 

Hardware failure alerts 

 

Third party non-volatile storage that prevents users from removing critical 
inventory, remote control, or virus protection agents. 

 

Nonvolatile storage for agents 

 

Tamper-resistant 

 

Remote hardware and software asset tracking that eliminates time-consuming 
manual inventory tracking, which also reduces asset accounting costs. 

 

E-Asset Tag 

 

HW/SW inventory 

 

System Defense 2.  In addition to the in-bound and out-bound packet filtering of 
the previous generation, System Defense 2 is an Intel AMT feature that uses 
advanced heuristics to help protect against the propagation of worms through the 
use of preset packet filters.  The number of new connections made to a specific 
port or IP address are counted over a specific time window.  If a preset threshold is 
exceeded, it will alert the Management Console and suspend the client’s network 
activity until the system can be remediated. 

 

Remote Configuration (RCFG) minimizes the cost to deploy Intel AMT by 
eliminating the need for IT personnel to touch each client system prior to 
configuration.  Remote Configuration consists of a single OEM BIOS/Firmware 
image that provides the Intel AMT client with information to authenticate 
connections and allows it to remotely perform a secure setup procedure.  IT 
departments must acquire an appropriate Intel AMT-trusted certificate as well as 
use a remote management application that supports Remote Configuration.  
Remote Configuration also requires the use of automatic IP addressing (DHCP). 

Summary of Contents for BLKDQ57TM


































































































Reviews: