Intel BLKDG41TX Technical Product Specification Download Page 10

Intel Desktop Board DG41TX Technical Product Specification 

10 

 

Table 1.  Feature Summary 

(continued)

 

Peripheral 
Interfaces 

 

Eight USB 2.0 ports: 

 

Four ports are implemented with stacked back panel connectors 

 

Four ports are routed to two separate front panel headers 

 

Four Serial ATA (SATA) connectors 

 

One Parallel ATA (PATA) connector 

 

PS/2 keyboard/mouse ports on the back panel 

 

One serial port header  

 

Diskette drive connector 

LAN Support 

10/100/1000 Mbits/s LAN subsystem using Broadcom* BCM57788 Gigabit 
Ethernet Controller  

BIOS 

 

Intel

®

 BIOS (resident in the SPI Flash device) 

 

Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, 

and SMBIOS 

Instantly Available 
PC Technology 

 

Support for PCI* Local Bus Specification Revision 2.3 

 

Support for PCI Express* Revision 1.1 

 

Suspend to RAM support 

 

Wake on PCI, serial port, front panel, PS/2 devices, PCI Express, LAN, and USB 

ports 

Expansion 
Capabilities 

 

Two Conventional PCI bus add-in card connectors 

 

One PCI Express x16 bus add-in card connector 

 

One PCI Express x1 bus add-in card connector 

Hardware Monitor 
Subsystem 

 

Voltage sense to detect out of range power supply voltages 

 

Thermal sense to detect out of range thermal values  

 

Three fan headers 

 

Two fan sense inputs used to monitor fan activity 

 

 

Summary of Contents for BLKDG41TX



























































































Reviews: