manualshive.com logo in svg

Intel BLKDG41MJ, Technical Product Specification, Page: 32 / 82

Share
Download
Intel BLKDG41MJ Technical Product Specification Download Page 32

Intel Desktop Board DG41MJ Technical Product Specification 

32 

 

1.12.2.2

 

Fan Headers 

The function/operation of the fan headers is as follows: 

•

 

The fans are on when the board is in the S0 state. 

•

 

The fans are off when the board is off or in the S3, S4, or S5 state.   

•

 

The processor fan header is wired to a fan tachometer input. The front fan header 
has independent tachometer input to the hardware monitoring and fan control 
device.  All fan headers support closed-loop fan control that can adjust the fan 
speed according to thermal conditions. 

•

 

All fan headers have a +12 V DC connection. 

 

For information about  

Refer to 

The locations of the fan headers and thermal sensors 

Figure 6, page 27 

The signal names of the processor fan header 

Table 15, page 42 

The signal names of the chassis fan header 

Table 14, page 42 

1.12.2.3

 

LAN Wake Capabilities 

 CAUTION 

For LAN wake capabilities, the +5 V standby line from the power supply must be 
capable of providing ad5 V standby current.  Failure to provide adequate 
standby current when implementing LAN wake capabilities can damage the power 
supply.   

LAN wake capabilities enable remote wake-up of the computer through a network.  
The LAN subsystem PCI bus network adapter monitors network traffic at the Media 
Independent Interface.  Upon detecting a Magic Packet* frame, the LAN subsystem 
asserts a wake-up signal that powers up the computer.  The board supports LAN wake 
capabilities with ACPI in the following ways: 

•

 

The Wake# signal for PCI Express compliant LAN designs 

•

 

The onboard LAN subsystem 

Summary of Contents for BLKDG41MJ



















































































Reviews:

No comments