manualshive.com logo in svg

Intel BLKDG31PR - 1333FSB DDR2 800 Audio Lan 4SATA uATX 10Pack Motherboard, Product Manual, Page: 16 / 74

Share
Download
Intel BLKDG31PR - 1333FSB DDR2 800 Audio Lan 4SATA uATX 10Pack Motherboard Product Manual Download Page 16

Intel Desktop Board DG31PR Product Guide 

16 

Audio Subsystem  

The onboard audio subsystem consists of the following: 

•

 

Intel

®

 ICH7  

•

 

Realtek ALC888 audio codec 

•

 

Back panel audio connectors 

•

 

Onboard audio header/connector: 

⎯

 

Intel High Definition audio front panel audio header 

⎯

 

Onboard S/PDIF connector 

The audio subsystem supports the following features: 

•

 

A signal-to-noise (S/N) ratio of 95 dB  

•

 

Independent multi-streaming 5.1 audio (using the back panel audio connectors) 
and stereo (using the Intel High Definition front panel audio header)  

Related Links: 

Go to the following link or pages for more information about: 

•

 

Audio drivers and utilities 

http://support.intel.com/support/motherboards/desktop/

 

•

 

The location of the back panel audio connectors, Figure 22 on page 49  

Summary of Contents for BLKDG31PR - 1333FSB DDR2 800 Audio Lan 4SATA uATX 10Pack Motherboard











































































Reviews:

No comments