Intel AnyPoint, User Manual

Page: 29 / 133

Chapter 3 – Setting up the Gateway with a Network
Copyright
©
2002 Intel Corporation
24
5 Click Next , then select an encryption option.
Each of these steps is described in more detail on
subsequent pages.
Note If you change the Network Name (SSID) or the
Encryption Password and forget the values, you
must reset the gateway to the factory default
settings. The reset button is located on the back
of the gateway and is not labeled. This button is
recessed. Use a paper clip to depress the button
for at least 5 seconds. You may then reconfigure
the gateway with the settings given to you by
your ISP, and the 802.11b wireless adapters
with the default gateway settings.