English
Advanced Functions
- 12 -
Roger Beep Tone Setting
The radio is equipped with a user selectable Roger Beep Tone feature, which enables you to
send a Beep Tone at the end of each transmission after every release of the PTT key (4). This
will prompt any receiving unit that your transmission has ended. To enable or disable this
function, please proceed as follows :
1. Press the MENU key (16) nine times, until the Roger Beep icon (M) and the
On
or
OFF
indications will blink on the LCD display (11).
2. Press the CHANNEL UP (8) or CHANNEL DOWN (9) keys to set the desired selection
on
(Roger Beep tone enabled) or
oFF
(Roger Beep tone disabled). If the Roger Beep function
is enabled, a beep tone is heard to confirm the selection.
3. To confirm the selection and exit the Menu Mode, press LOCK key (7) or press the MENU
key (16) to move to the next function.
4.
When the Roger Beep tone is enabled, the
R
icon (M) appears on the LCD display (11).
Keypad Program Tone Setting
When a key is pressed, a beep tone is heard to confirm your command. The user may enable
or disable this keypad program tone.
1. Press the MENU key (16) ten times, until the keypad tone icon (G) and the
On
or
OFF
indications will blink on the LCD display (11).
2. Press the CHANNEL UP (8) or CHANNEL DOWN (9) keys to set the desired selection
on
(keypad tone enabled) or
oFF
(keypad tone disabled). If the keypad tone is enabled, a
beep tone is heard to confirm the selection.
3. To confirm the selection and exit the Menu Mode, press LOCK key (7) or press the MENU
key (16) to move to the next function.
4.
When the Keypad tone is enabled, the keypad tone icon (G) appears on the LCD display
(11).
Stop Watch function
This function will enable a timer function.
1. Press the MENU key (16) eleven times, until the Stop Watch Icon (K) and the
00:00
indication will blink on the LCD display (11).
2. Press the CHANNEL UP key (8) to start counting and press the CHANNEL DOWN key (9)
to stop the function. The radio can still operate in this mode.
3. Press the CHANNEL UP key (8) again to re-start.
4. To reset the timer press the CHANNEL DOWN key (9) two times.
5. To exit to Stand-by mode press the LOCK Key (7).
