Controls and operation
- 5 -
English
M.
LOCK Icon
The LOCK icon is lighted when the LOCK function has been enabled.
N.
EMG Icon
The EMG icon is lighted when one of the special pre-programmed emergency channels has been selected.
O.
SCAN Icon
The SCAN icon is lighted when the SCAN function (automatic search of busy channels) is enabled.
P.
Alphanumeric Digits
These three numeric or alphanumeric digits indicate the operating channel number (01 to 80, according to the
programmed frequency band).
6.
CHANNEL Selector
This knob selects the channel number, by one channel steps. The knob may be turned clockwise to select channels
upward or counter clockwise to select channels downward.
7.
Q.DN (Quick Down) Key
This key allows fast selection of the operating channel downward. Each time this key is pressed, the channel number
moves down by 10 channels.
8.
AM/FM and LCR Key
AM/FM SELECTOR
This key allows to select the AM or FM operating mode in both RX and TX. The AM/FM operating mode selection is
possible only if it is allowed the programmed frequency band, otherwise the selection is not possible.
LCR
Pressing this key for about 1.5 seconds, the last used channel will be automatically recalled.
UK / CE SELECTOR
If the UK frequency band has been programmed, shortly pressing this key, it will be possible to select between the
UK channels (frequencies) and the CE channels (frequencies).
9.
Q.UP (Quick UP) Key
This key allows fast selection of the operating channel upward. Each time this key is pressed, the channel number
moves up by 10 channels.
10.
AS/SQL Control
SQUELCH CONTROL (SQUELCH manual adjustment)
The SQUELCH control allows to silent the receiver by cutting the background noise, when no signals are received. Turn
the knob clockwise until the background noise is cut. Turn the knob counter clockwise (SQUELCH opening) in order to
listen to the weakest signals.
AS CONTROL (SQUELCH fixed setting)
The AS function allows to automatically silent the receiver, avoding the SQUELCH manual adjustment. A fixed
SQUELCH threshold is factory pre-set. To enable the fixed SQUELCH function, turn the knob fully counter clockwise to
the AS position, until a click noise is heard.
Summary of Contents for M-795
