Intek H-510 PLUS, Owner'S Manual, Page: 8 / 12

- 8 -
Frequency Bands Table H-510 PLUS
Frequency Bands Table H-510 PLUS
The INTEK H-510 PLUS transceiver includes an advanced multi-standard programmable circuit design, which allows to
program the radio in accordance with the frequency band, operating modes, transmitter RF output power in full
compliance with the local regulations of the country where the radio will be used. A total of 5 programmable frequency
bands are available, as per the following table :
WARNING ! The radio has been factory pre-programmed on the E1 (40CH AM 4W) frequency band, as this standard is
currently accepted by some countries (Italy and Spain). Please refer to the information table at page I (Restrictions on
the use of CB transceivers).
FREQUENCY BAND
ID CODE
COUNTRY
SPECIFICATIONS
(Channels, Operating Modes, TX Power)
E1 ITALY/SPAIN 40CH AM
I2 ITALY
36CH AM
DE GERMANY 12CH AM 1W
EU EUROPE/FRANCE 40CH AM 1W
PL POLAND
40CH AM POLISH FREQUENCIES