Intek DX-460S, Instruction Manual

Page: 13 / 32

Menu Operation
- 11 -
English
MENU OPERATION
In stand-by status, press FUN (9) key to enter the menu.
Press the UP/DOWN (10) keys to choose menu items.
1. Menu function sequence
SCAN ---> T->R (reverse frequency) ---> FREQ (not available) ---> KEYBO (choose keyboard lock
mode) ---> LED (indicator setup) ---> BEEP (warning sound switch setup) ---> POW (RF output power
HI/LOW) ---> SQL (voice level setup) ---> TOT (emission timing setup) ---> VOX (VOX sensitivity setup)
---> STEP (not available).
2. Key Function in the Menu Mode
FUNCTION Key (9) : enter the menu set-up status
C Key (8) : exits the upper menu or quit menu set-up status
UP/DOWN Keys (10) : choose items
MENU/CONFIRMATION Key (5) : confirm item choice or parameter
EXIT Key (6) : exits any status to stand-by status quickly.
SCAN : scanning
In the stand-by status, press the FUN (9) key to display scanning indicator, and when the LCD Display
shows
SCAN ? , press the MENU/CONFIRMATION (5) key to start scanning. If signals exist in one
channel, the channel will be displayed. Then press the MENU/CONFIRMATION (5) key, the Two-Way
Radio will stop scanning and remain at the current channel or else, it will start scanning for the next
channel after 2 seconds.
T->R (reverse frequency)
When dual frequency is used to start reverse frequency function, the receiving frequency and emission
frequency will interchange. Press the FUN (9) key then press the UP/DOWN (10) keys. When the LCD
display shows
T->R ?, press the MENU/CONFIRMATION (5) key to confirm.
FREQ : not available on this model
KEYBO : Keyboard lock setup
In the stand-by status, press the FUN (9) key and then the UP/DOWN (10) keys to find, and when the
display shows
KEYBO? , press the MENU/CONFIRMATION (5) key to enter. You will see two options
available, AUTO and MANUAL.
AUTO: automatic locking
When this option is chosen, the keyboard will be locked automatically when no operation is performed.
MANUAL: manual locking
When this option is chosen, the keyboard cannot be locked automatically.
LED : light setup
In the stand-by status, press the FUN (9) key and then the UP/DOWN (10) keys, and when the display
shows
LED ? , press the MENU/CONFIRMATION (5) key to enter. You will see three options available:
AUTO, MANUAL and ON. Press the MENU/CONFIRMATION (5) key to select the desired item.
AUTO: When this option is chosen, the display light will be turned on once you press the key.
MANUAL: When this option is chosen, the display light will not be turned on automatically.
You have to operate the side key manually to use light.