!
Onboard Mobile Label Printer (Bluetooth)
General
The QLn420-VC forklift cradle allows use of the Zebra QLn420 printer in a vehicle. The vehicle cradle
receives power from a
DC power adapter
(Zebra Part No. AK18913-003)
with an output of 12 VDC. The
DC power adapter plugs into the cradle and the input is an unterminated two wires cable which connects to
the forklift power from 12 to 60 VDC.
-
WHITE Wire + Ign.switch or On /OFF switch
-
BLACK Wire - Battery negative
Note:
The printer runs off its own battery which is monitored and charged by circuitry within the printer
1. Mechanically prepare and install QLn420-VC vehicle cradle
2. If you are installing the optional mounting arm remember the arm provides a considerable range of
movement for cradle and printer.
3. Connect the power input cable of the DC power adapter from the vehicle’s electrical system.
4. Consult Zebra QLn420-VC vehicle cradle guide,
P1052234-001 Rev.A
for details
Vehicle Cradle
Integrated Visual Data Technology Inc. 3439 Whilabout Terrace, Oakville, Ontario, Canada L6L 0A7
www.skidweigh.com
Note:
For user guide consult QLn420 software & documen-
tation CD supplied with every Zebra Printer kit.
- User Guide, Mobile Printer P1028026-004 Rev.A
- User Guide,Vehicle Cradle P1052234-001 Rev.A
Mounting
Power
adapter
