7
Some common commands :
Text these numbers to the SIM card in your GPS tracker to control it
Some common settings :
whereareyou
- Send me the current GPS location
help
- Send me some common commands
settings
- What are the current settings
gprssettings
- What are the current gprs (internet) settings
setphone1
- Set my current phone number
set441234567879
reset
- Reset to factory settings. (You will need to text setphone1 again)
setwakeup
- How often should the device wake. i.e.
setwakeup 6 hours
setwaketime
- How long the tracker stays connected after waking
setwaketime 5 mins
setstatus
- How often the tracker should 'check in'. i.e.
setstatus 7 days
flash
- Flash the light.
networkinfo
- Send me local cell information for my mobile tower
cellinfo
- Send me local cell information for all surrounding mobile towers
checkbattery
- How much charge does the battery have left
setvibration
- Turn the vibration sensor on or off i.e.
setvibration on
setdebug
- Causes the tracker to flash when it receives a text.
Only for testing
setnotify
- Notify me each time the tracker is woken by movement (or only the first time)
GPRS tracking commands
setapn
- Set the GPRS APN ie.
setapn myapn.com
setuser
- Set the GPRS username and password ie
setuser myuser mypassword
setip
- Set the GPRS IP and port. ie
setip 78.129.149.11 9201
settracking
- Turn tracking on or off ie
settracking on
setgprsinterval -
Set the time in between tracking uploads. ie
setgprsinterval 20
seconds
upload
- Upload the GPS location once to the website
download
- Download a new version of firmware to the tracker ie
download latest
UPPER or lower case is not important but ensure there are no leading or trailing spaces
The setwakeup, setwaketime and setstatus messages are denominated in seconds, minutes, hours or
days. e.g. setwakeup 6 hours, setwaketime 5 minutes, setstatus 7 days or you can abbreviate
setwakeup 6 h, setwaketime 5 m, setstatus 7 d.
The setvibration, setdebug, settracking and setnotify messages take the form setxxxxx on/off
These instructions are valid for the tracker at the time of writing. You can download new
versions of software to your tracker from time to time when they are released. Because of this,
specific functions may be added or changed.
Refer to the Spylamp website for the latest instructions
