20
1. Using a 11/16” wrench,
loosen and disconnect the
braided hose
4. Remove fitting and tip
assembly from burner.
2. Using a 3/4” wrench,
loosen the backing bolt that
keeps the tip assembly in
place.
3. Once the backing nut is
loose, you will be able to
unscrew by hand.
5. Using the tip cleaner or a
welding tip cleaner, clean
the tip. This will dislodge
any debris that may be
clogging the tip.
6. Blow compressed air
through the tip to remove
debris from behind the
orifice.
Reverse steps for re-assembly. When fully assembled, apply soapy water, blow compressed
air through system to check for leaks. Tighten any fitting that leaks.
Regular Maintenance –Cont’d
Heaters (cont’d)
- If cleaning the tip still doesn’t restore the glow on the heater, you may need to
remove the whole fitting assembly on which the tip is mounted to dislodge any debris that has
accumulated behind the tip.
