12
Cleanup
Cleaning the Rapid Finisher 2
Put about 1
– 2 inches (25 – 50 mm) of water
into the Lower Case that has the Liner/s
Lower the machine into the water and run the
brushes at a slow speed until the brushes are
clean
The motor can be washed with
standard hose pressure. CAUTION:
ALWAYS UNPLUG THE MACHINE
FROM THE GENERATOR FIRST.
Never use a pressure washer
CAUTION: NEVER SPRAY OR
IMMERSE THE ELECTRICAL BOX
ON THE HANDLE . USE A DAMP
CLOTH TO WIPE IT DOWN INSTEAD
If the Liners need to be replaced a liner kit (part number 80-0-403A), that contains 2 Base Liners
and 2 Case Liners, is available from Integrated Paving Concepts. The Base Liner is secured by 4
wing nuts and large washers on the underside.
To extend the life of the brushes place the Rapid Finisher 2 in water when it is not being used.
