For example if you push down the switches 8 & 16
the starting address will be channel 24.
Remember that all
other
switches must be UP.
Many people will just set #1 to the down position
and leave the rest up for common applications
where the first light or dimmer is set to channel 1.
Fader1 will now be at Address, Fader2 will be at
1, etc.
The DMX 512 universe is cleared at power up.
.
When you change the current Live Address and don’t press Change the
Red LED will blink to remind you the address is not the current live
address, when you change back to the current Live address or press
Change the Red LED will turn off.
4
Scene
Memory
6. Special case addresses
6.1 Clearing the Universe
Sometimes you may want to send 0’s for the entire 512
universe.
This can be useful if dimmers retain values that you wish
they hadn’t.
Set the the Address to
999
(don’t press Change)
, hold
Delete
for 3
seconds, LED blinks, release. All 512 channels were sent 0 levels, the
scenes defaulted to off. Set the pushwheel back to your Live Address. As
of v1.31 holding down both Bumps 1&2 during power up will do the same
clearing operation. (Note that a starting Live address of 500+ w/ Master
down has the same effect of clearing the universe and the universe is also
cleared at power up)
a
the DMX 512 universe is also cleared at power up
(as of v1.32
)
.
7. Other Features and notes
7.1 Battery and power operations
Professional 5pin
XLR
1 Ground, 2 Data –, 3 Data+, 4, 5 No connect
The internal rechargeable battery runs about 2 days with a full
charge while operating continuously.
LED indication is provided on the rear panel for
Charge
Status &
Low Batt
.
The
Charge
light will turn off when fully charged.
The
Low Batt
light indicates you should charge or plug in a
backup source if no time to recharge.
A MICRO B USB power input is also provided, external portable
battery pack “chargers” as used for smartphones or a laptop may
also be used as a power source and as a charging source for the
internal battery.
So in a pinch with a discharged internal battery and no handy AC
around you can be instantly running by attaching here (no USB
cables are supplied).
Full charge time is few hours, useful charge can be had in tens
of minutes (it will charge slightly faster with the unit OFF).
The adapter will simultaneously operate the unit and charge the
battery.
