A 5V DC adapter is provided
(
model PS-1512
) with a 4.0 x 1.7
barrel connector (EIAJ 2 size). The
adapter is worldwide AC voltage
input with North American prongs
and is ultra mini in size.
Ultra compact 12 channel DMX controller.
Rugged, lightweight with integral protective sidewall barriers
.
7.2 VESA mount
On the bottom surface 4 threaded nuts are provided which
conform to the VESA mounting standard: 75mm square pattern of
four M4 threads (Metric screw size M4) typically supplied with
VESA mounts such as Stellar Labs 35-4310 Microphone Stand
VESA mounting adapter shown here
.
8. Dimensions
W, H, D Front / Rear: 3.75”, 7.8”, 1.6 / 2.3”
(10cm, 120cm, 4 / 5.8cm)
Weight 1.1lbs (0.5kg), in carton 1.6lbs (0.7kg), shipping wt
2.2lbs (1kg)
Firmware version is indicated by a label on the bottom.
Model Number: 750-0814 Model Name: DMX-iT 512e
User Guide v1.32
Integrated Controls, Inc.
San Francisco, CA
www.dmxit.com
Integrated Controls,
Inc
.
DMX-iT
12e
User Guide
1.
Master
The
Master
fader
is a Grand Master
which acts as a final
Level for all output
levels of all functions.
2.
Bump
buttons
Bump
buttons are
below each of the
12 channel faders
Pressing a
Bump
button will
immediately raise
that channel to full
level subject to the
Master.
3. Basic Operation
Set the DIP switch on the reat to a
starting Address
which is the same thing as your Starting Channel.
The address only read at power up so if you change the
address you must turn the power off and back on.
Push the switches down until the numbers add up to your
starting address.
A
If you change the Starting Channel you must
turn the power off and back on for the change to
take effect.
