Integratech bvba – Groenstraat 48 – BE3270 Scherpenheuvel - Belgium
Installation and maintenance should always be done by qualified personnel. The light source of this fixture is not replaceable, the luminaire
must be replaced at the end of its life.
Damaged devices in original packaging are exchanged under guarantee.
For outdoor applications, always use stainless steel screws and ensure firm anchoring.
The grounding must be correctly connected at all times to prevent safety problems.
Always check whether the correct connection voltage is present.
Used lamps
Always return old or defective LED fixtures to an appropriate collection point in accordance with the applicable regulations regarding
environmental protection. Used lamps can be deposited at a recycling point where they are accepted for free. Proper use of equipment makes
it possible to preserve valuable environmental resources and prevent negative consequences for health and the environment.
ENG Manual UBOAT HO
Reference
UBOAT100
UBOAT150
A
605
905
B
135
C
121
D
565
135
121
865
Dimensions:
Mounting:
Optional mounting accessories:
UBOATMB: extra long mounting bracket
UBOAT-SUS: suspension set 2 meters
1. Place the mounting brackets on the unit and use the supplied bolts to anchor the unit
in the desired position.
2. Open the connection box and connect the power supply to the driver. The device is
suitable for a supply voltage between 100~277Vac 50/60Hz. Brown = phase, blue =
neutral, yellow / green = ground.
3. Measure the distance between the suspension points and drill two 8 mm holes where
you want to install the device. The mounting brackets on the unit can be moved if
necessary with a margin of +/- 80mm.
4. Place the expansion plugs supplied and screw the unit tight with the expansion plug
bolts.
Type
Expansion plugM8x70
Mounting bracket & nuts
#
2
2
Supplied accessories:
A larger suspension bracket is
available as an option to fix UBOAT to
the ceiling or wall.
UBOAT200
E
1205
135
121
1165
72
72
72
UBOAT240
1505
135
121
1465
72
A
C
E
D
60 mm
60 mm
