12
INSTALLING DVXi XM16 and DVXi XM32
Use Figure 4 to complete the following installation instructions.
1.
Plug the power cord into the power connector (A).
2.
Plug the mouse into the mouse connector (B).
3.
Plug the keyboard into the keyboard connector (C).
4.
To provide a network or dial-up connection, connect a network cable to
the network connector (D) or a phone line to the optional modem (G).
5.
Plug the monitor into the monitor connector (E) and electrical outlet.
6.
Plug the XMUX Cable into the DB-25 connector (F).
7.
(Optional) Connect your PTZ cameras to the RS-422 port (H) as described
in the PTZ installation manual.
8.
Plug the power cord into an electrical outlet.
9.
To provide power to the DVXi box, use the power switch on the rear
panel (J).
10. To turn on the DVXi system, use the power switches on the front panel of
the box and on the monitor.
11. Proceed to the “Installing XMUX” section.