Integral Circuits CC 50 A, User Manual

Page: 16 / 32

16
Please note that the CC50A controller needs to be turned on for
the values to be stored internally. The System won’t take the
changes if the CC50A is turned off. Only settings that can be
changed offline are:
deadman time, fall time, reverse limit, deadman mode,
brakebutton mode and backlight mode.
!
Changing menu settings.
1. Use the knob to choose which menu setting you want to
change.
2. Press the knob to change the currently selected setting.
3. A rectangle will appear around the value.
4. Now use the knob to change the value.
5. Press the knob again and the menu will ask you if you want
to save: Yes = save change. No = dismiss change.
6. Press the brake button (menu cancel) at any time and the
handset will return to the dash in brake-lock mode. You can
re-enter the menu by just holding down the knob again for a
moment.
List of available settings:
Name Value Range
Max Throttle 10-100%
Default PSI 1-50psi
Maximum PSI 10-50psi
Acceleration 15-25% per sec
Deceleration 15-25% per sec
Wheel Diameter 3.0-8.0 inch
Deadman Time 1-30 seconds
Fall Time 1 - 100ms
RHL Dimming level 1 to 4
Reverse Limit 5 - 50% of throttle
Deadman Mode off / on
Brake button Mode normal / inverted
Backlight Mode off / fade / dim / bright
Max Throttle
100%
Max Throttle
85%
Max Throttle
100%
press to exit
Save? YES NO
1.
2.
3.
4.
5.
6.
press
press