f.
settings
22
79. aMplifier suB (rear) channel settings
Gain: 90% (turn to max, then back off 1/10th turn)
Output: LOW (low-pass crossover)
Crossover: 65 Hz
Bass Boost: 0 [THIS MUST BE ZERO!!]
80. head unit settings
L/R Balance: Center
F/R Fade: Fade to the FRONT about 40% from centered. About
80% of your total volume should be coming from the fronts, the
rears should just provide enough “fill” that it doesn’t sound empty
behind you.
Bass: Flat
Treble: Flat
Aux Input Level (see below): 50%
81. aux input vOluMe
The volume setting for the AUX input on the headunit can be
accessed by pressing and holding the right side of the 4th button
from the right. The factory default is 2. We recommend a start-
ing setting of 4. Please refer to the MINI Manual for setting the
Aux level on NAV and MINI Connect equipped vehicles.
82. replace all panels & triM
All parts, panels, and trim install in the opposite manner that
they were removed.
83. integral audiO Badges
[All Vehicles EXCEPT 2010+ with HK]
Remove the paper backing and affix the adhesive Integral Audio
badges in the location of your choice. We recommend placing
them on the lower section of the woofers as indicated (1).
The adhesive sets up over a 48 hour period. The badges can safely
be repositioned 2 or 3 times within the first 10-15 min after ap-
plication.
refer tO the Mini cOOper
Owner’s Manual!
refer tO previOus iMages
