2/4
161951_V15_QSG_VIAFLO_VOYAGER_EN.docx
Language selection
From the Main Menu, use the touch wheel to scroll to the Toolbox and press
OK
. Use the “Language”
option to select the desired language.
Attaching GRIPTIPS
Press the pipette into the GRIPTIPS of the appropriate size until you hear and feel a click indicating
that a seal has been achieved. When loading GRIPTIPS using a multichannel pipette, slowly rock
the pipette from one side to the other side to ensure the proper seal is achieved.
Selecting a pipetting mode
With your electronic pipette, you have the choice of building protocols by selecting from a menu of
predefined programming modes, or you can create custom multi-stepped protocols.
Pipetting mode
Description
Pipet
Liquid transfers when aspirate and dispense volumes are equal.
Repeat Dispense
Dispense multiple aliquots of the same volume.
Sample Dilute
Aspirate two liquids divided by an air gap, followed by dispense.
Pipet/Mix
Multiple mixing by aspiration and dispensing of defined volume.
Manual Pipet
C
ontrol the aspiration and dispensing up to the set volume.
Reverse Pipet
Liquid transfers of viscous or high vapor pressure liquids.
Variable Dispense Dispense multiple aliquots of different volumes.
Multi Aspirate
Aspirate multiple aliquots of different volumes.
Sample Dilute/Mix Aspirate two liquids divided by an air gap, followed by dispense and mix.
Serial Dilution
Aspirate a transfer volume followed by dispense and mix sequences.
Custom
Allows to create and store of up to 40 multi-stepped pipetting protocols.
From the Main Menu, use the touch wheel to scroll to your desired function-
based programming mode. Press
OK
to enter the mode and to start defining
parameters.
Setting/changing variables
Scroll to Edit and
press
OK
.
A list of editable steps is
displayed.
Select a step and press
OK
.
Use the touch wheel to set the
value and press
OK
.
Press
to save your settings.
Pipette’s toolbox
The Toolbox provides a variety of options, as setting personal preferences like the touch wheel spin
sensitivity, calibration, computer connectivity and device information.
