7
Integra
®
Luxtec
®
UltraLite® Pro Headlight
The module can be removed from the headband, if needed,
by placing a small flathead screwdriver in the slot above the
module in the headband (Fig 16) and pushing the module out.
Be sure to remove the fiber optic cable from the module first.
CAUTION
To plug or unplug the fiber optic cable from the light
source, it is recommended that the light source power
be turned off. Be sure to hold the strain reliever near the
end of the cable. This part of the cable is reinforced to
prevent damage to the glass fibers inside and to
prevent burns.
ADJUSTMENTS
Once the headlight module and fiber optic cable are attached
to the headband, the headlight assembly is ready to use. The
headlight module can be adjusted vertically while wearing
the headlight system by grasping the module and aligning the
light spot to a comfortable working position.
These instructions should help you get started with
your new Luxtec equipment, quickly and easily.
If you have any problems, please contact
Integra LifeSciences Corporation: 800-325-8966,
or +1-508-835 -9700, Fax +1-508-835 -9976.
All Headlight Systems:
To ensure long life for the headband, cable, and modules,
they should be stored in the duffel bag provided.
Fiber optic cables are fine, high quality optical instruments.
You can prolong the useful life by following a few guidelines:
• Avoid stretching your cable, forming configurations
involving sharp angles or kinks, or contact with sharp or
pointed objects. The internal light fibers are made of glass,
a material which breaks under stress. Fiber breakage will
result in diminished light output.
• Utilize the gown clips (provided) to keep the headlight cable
secured to the surgeon’s gown for greater comfort and
maneuverability.
• DO NOT use your fiber optic cable with any alterations to its
original design or fabrication.
• Keep the optical faces from contacting the floor or other
hard surfaces. The resulting scratches will diminish light
output.
(Fig 16)
