Advanced Operations
En-61
Audio Selector
■
Audio Selector
`
ARC
:
The audio signal from your TV tuner can be sent to
HDMI OUT MAIN
of the AV receiver.
*1
With this selection, the TV’s audio can be
automatically selected as a priority among other
assignments.
`
HDMI
:
This can be selected when
HDMI IN
has been
assigned as an input source. If both HDMI (
HDMI
IN
) and digital audio inputs (
COAXIAL IN
or
OPTICAL IN
) have been assigned, HDMI input is
automatically selected as a priority.
`
COAXIAL
:
This can be selected when
COAXIAL IN
has been
assigned as an input source. If both coaxial and
HDMI inputs have been assigned, coaxial input is
automatically selected as a priority.
`
OPTICAL
:
This can be selected when
OPTICAL IN
has been
assigned as an input source. If both optical and HDMI
inputs have been assigned, optical input is
automatically selected as a priority.
`
Analog
:
The AV receiver always outputs analog signals.
You can set priorities of audio output when there are both
digital and analog inputs.
Note
• This setting can be made only for an input source that is assigned
to
HDMI IN
,
COAXIAL IN
, or
OPTICAL IN
.
• This setting cannot be used with the
NET
and
USB
input
selectors.
• When using the Whole House Mode, “
Audio Selector
” is fixed
to “
Analog
”.
*1
You can select “
ARC
” if you select the
TV/CD
input selector.
But you cannot if you’ve selected “
Off
” in the “
Audio Return
Channel
” setting (
➔
page 65
).
Setting the Incoming Digital Signal (Fixed
Mode)
■
Fixed Mode
`
Off
:
The format is detected automatically. If no digital
input signal is present, the corresponding analog
input is used instead.
`
PCM
:
Only 2-channel PCM format input signals will be
heard. If the input signal is not PCM, the
PCM
indicator will flash and noise may also be produced.
`
DTS
:
Only DTS (but not DTS-HD) format input signals
will be heard. If the input signal is not DTS, the
dts
indicator will flash and there will be no sound.
When “
HDMI
”, “
COAXIAL
” or “
OPTICAL
” is selected
in the “
Audio Selector
” setting, you can then specify the
signal type in “
Fixed Mode
”.
Normally, the AV receiver detects the signal format
automatically. However, if you experience either of the
following issues when playing PCM or DTS material, you
can manually set the signal format to PCM or DTS.
• If the beginnings of tracks from a PCM source are cut off,
try setting the format to PCM.
• If noise is produced when fast forwarding or reversing a
DTS CD, try setting the format to DTS.
Note
• The setting will be reset to “
Off
” when you change the setting in
“
Audio Selector
”.
Main Menu
Listening Mode Preset
You can assign a default listening mode to each input
source that will be selected automatically when you select
each input source. For example, you can set the default
listening mode to be used with Dolby Digital input signals.
You can select other listening modes during playback, but
the mode specified here will be resumed once the AV
receiver has been set to standby.
Listening Mode Preset
1
Use
q
/
w
to select the input source that you want to
set, and then press
Enter
.
The following menu appears.
1
2
3
4
5
“
Setup
”
Default listening mode for analog and PCM sources.
Analog/PCM
Mono/Multiplex Source
2ch Source
Dolby D/Dolby D Plus/TrueHD
DTS/DTS-ES/DTS-HD
Other Multich Source
All Ch Stereo
e
r
5-1. Listening Mode Preset
BD/DVD
Full Mono
PLllx Movie
Straight Decode
Straight Decode
Straight Decode
