13
En
Speaker combinations
0
In any of the combinations, up to two powered subwoofers can be connected.
Points to note with speaker combinations
(*1) It is not possible to use Bi-AMP and ZONE speakers at the same time. However, with 2.1 ch to 7.1
ch, it is possible to use Bi-AMP and ZONE 2 speakers at the same time.
(*2) If you have not connected ZONE 3 speakers in another room but have only connected ZONE 2
speakers, connect the ZONE 2 speakers to the HEIGHT 1 jacks. However, if Bi-Amping connections
are used for front speakers, connect the ZONE 2 speakers to the HEIGHT 2 jacks.
(*3) If front speakers are to be Bi-Amping connected, height speakers need to be connected to the
HEIGHT 2 jacks.
(*4) ZONE 2 speakers need to be connected to the HEIGHT 1 jack, ZONE 3 speakers need to be connected to
the SURROUND BACK jacks, and height speakers need to be connected to the HEIGHT 2 jacks.
(*5) This unit consists of a 9 ch amplifier, so when using a Bi-Amping connection for the front speakers,
use an analog audio cable to connect the power amplifier to the PRE OUT HEIGHT 2 jacks, then
connect the height speakers to the power amplifier.
(*6) This unit consists of a 9 ch amplifier, so with this combination use an analog audio cable to connect
the power amplifier to the PRE OUT BACK jacks, then connect the surround back speakers to the
power amplifier.
HEIGHT 1/HEIGHT 2
When connecting 2 sets of height speakers, the height speaker combinations you can choose are as
follows.
– Height 1 Speaker: Top Middle, Height 2 Speaker: Rear High
– Height 1 Speaker: Front High, Height 2 Speaker: One of Rear High/Top Middle/Top Rear/Dolby
Enabled Speaker (Surround)/Dolby Enabled Speaker (Surround Back)
– Height 1 Speaker: Top Front or Dolby Enabled Speaker (Front), Height 2 Speaker: One of Rear High/
Top Rear/Dolby Enabled Speaker (Surround)/Dolby Enabled Speaker (Surround Back)
When connecting only one set of height speakers, select one type of height speakers from the types
available.
> Install
> Playback
Troubleshooting | Supplementary Information, etc.
Speaker
Channels
FRONT
CENTER
SURROUND
SURROUND
BACK
HEIGHT 1
HEIGHT 2
Bi-AMP (*1)
ZONE 2 (*1)
(ZONE SPEAKER)
ZONE 3 (*1)
(ZONE SPEAKER)
2.1 ch
3.1 ch
4.1 ch
5.1 ch
6.1 ch
(*2)
7.1 ch
(*2)
2.1.2 ch
(*3)
(*4)
3.1.2 ch
(*3)
(*4)
4.1.2 ch
(*3)
(*4)
5.1.2 ch
(*3)
(*4)
6.1.2 ch
(*5)
7.1.2 ch
(*5)
4.1.4 ch
5.1.4 ch
6.1.4 ch
(*6)
7.1.4 ch
(*6)
