45
SN 29343136 DPS-5.2
DISPLAY
ENTER
Memory
Move
Select
Off
1
2
3
Check
■
Adjusting the picture quality settings
–
To create your own setting (2)
1 Use the cursor button (
3
) to select [Start] then press
ENTER.
Memory
Fine Focus
Contrast
Sharpness
Chroma Level
Hue
On
Off
soft
fine
min
max
min
max
green
red
Off
1
2
3
Video Memory Select
Video Setup
5 Use the cursor buttons (
2
/
3
) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes
immediately.
6 Repeat steps 4 and 5 to make adjustments to other
settings.
If you would like to save the settings in the player’s memory, be
sure to select either [1], [2], or [3] in the [Memory] setting to
establish which memory location to save the new settings in.
Please note that if you select a location where settings have
already been saved, the old settings will be replaced by the new
ones.
2 Use the cursor button (
∞
) to select [Video Setup] and press
ENTER.
3 Press DISPLAY.
4 Use the cursor buttons (
5
/
∞
) to select the setting and use
the cursor buttons (
2
/
3
) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes
immediately.
5 To memorize the setting, select Memory 1, 2, 3, then press
ENTER.
The previous setting will be erased.
7 When you are finished making adjustments, press ENTER
to establish the new settings.
