DPC-5.2
UPGRADE THE FIRMWARE 1
Two files are saved to the same directory.
1. Jigs connection
1-1. PC-JIG
Connect the D-Sub(25 pin) cable.
1.2. JIG-DPC-5.2
Connect the FFC and socket (down load PCB).
1.3. Remove a sheet at the bottom.
Connect the socket (CP202).
1-4. Turn on the power switch of DPC-5.2.
Light up the LED on the JIG PC board assy.
1-5. Start an MS-DOS window.
(Click Strat, point to Programs, point to Accessories,
and then click MS-DOS Prompt.)
1-6. Input key the "dvd down AAAABBB.bin" and
then click Return.
a. The program for writing
b. The program of binary form AAAABBB.bin
AAAA : model name
BBB : Version
CP202
1
15
Connect the grade up jig
Part No. 0P42
To Computer
Down load JIG
Part number 0P42
Main PC board assy
(on the bottom side of DPC-5.2)
c5.2