14
1
2
3
POWER
Standby/On
or
Open /Close
or
Power
OPEN/
CLOSE
CAUTION
Keep your fingers clear of the disc drawer as it is
closing to avoid personal injury.
DP C
-5.1
DP C
-5.1
Standby/On
Play
Stop
Pause
Open /Close
On
O f f
Power
1
2
3
4
5
Display
Dimmer
Disc Select
Disc Skip
Next Selection
CD Play
Direct Digital Path
POWER
2
3
DISC 1–5
STANDBY/ON
DISC SKIP /
Disc Skip
Playing back Discs
This section shows you the basics on how to playback a disc.
Most steps in this manual need to be performed using the
supplied remote controller. The relative buttons are usually
indicated at the beginning of a section.
Basic Playback
■
Preparations
• To view a video disc, switch on your TV set and select the video input the DPC-5.1 is connected to. See also pages
10, 11 for how to connect the DVD Changer to your TV set.
• If you are also using an amplifier for separate audio playback (see pages 11, 12, 13), switch on the amplifier and
select the input the DPC-5.1 is connected to.
Connecting to a Wall Outlet and Powering On.
1
Plug the power cable into a suitable wall outlet.
2
Press the Power button on the main unit to switch it
to Standby mode.
The Standby/On indicator on the main unit lights.
3
Press the Standby/On button on the main unit, or the
POWER button on the supplied remote controller to
switch on the DVD Changer.
The display lights up, and the Standby indicator
goes dark.
Press the OPEN/CLOSE button.
The disc drawer opens, and the disc indicator lights up.
(See “DISC INDICATORS ATTENTION” on page 42.)
Place a disc in the front disc tray (DISC 1).
DP C
-5.1
Standby/On
Play
Stop
Pause
Open /Close
On
O f f
Power
1
2
3
4
5
Display
Dimmer
Disc Select
Disc Skip
Next Selection
CD Play
Direct Digital Path
DISC 2
DISC 1
Be sure to insert the disc with the playback side down.
■
Placing discs in the remaining disc trays.
Repeatedly press the Disc Skip / button on
the main unit to rotate the disc drawer in the
direction of the arrow of the button, and place
a disc in each desired tray (1–5).
Press the OPEN/CLOSE button again.
The disc drawer closes.
Press one of the DISC 1–5 buttons to select the
desired disc on the tray for playback.
Notes:
• The DPC-5.1 supports two disc sizes.
To avoid damaging your discs or
causing malfunction, be sure to insert
the discs in the correct guide.
• Only use DVD video discs or audio
CDs. Other data carriers may
damage your DVD Changer and/or
amplifier/TV set.
Note:
The disc drawer can also be opened
when the DVD Changer is switched
off.
Note:
Alternatively, press one of the DISC 1–5
buttons to close the disc drawer and
play the selected disc automatically.
4
Open /Close
-
2
-
3
Note:
When you use the DPC-5.1 for the first
time:
When the DPC-5.1 is shipped from the
factory, the Power switch is set to On
(
On
Off
). Therefore, when you
plug in the power cable to the AC
outlet, the Standby/On indicator lights
up and the unit enters Standby mode
as described in Step 1-
2
.