12
English
Charging of cell phones and tablets
Plug the switch cable to Quick Charge output port.
1. Select appropriate connector and connect it to your mobile phones or tablet.
2. Touch the switch button, it can recognise electronic product’s suitable parameters, start to
charge far mobile phone/tablet etc.
Flash light
Hold light button #2 for 3 sec to turn it on, press the button, it is strobe, SOS, and off.
Work light
Hold light button #1 far 3 sec to turn it on, and hold the button far 3 sec to turn it off.
Starting state indicator legend (9)
GREEN LIGHT
on
: Telling the connection is correct and the circuit is working, you can turn on the
engine to Jump-start directly.
RED LIGHT
on with Alarm buzzer
: Telling the connection is wrong, or short-circuit happens.
Check and correct the clamps till the GREEN LIGHT on then turn on the engine.
GREEN LIGHT
blinking
: Saying the vehicle battery is low voltage, press the “BOOST” button, wait
GREEN LIGHT becomes sol id, then turn on the engine within 30s.
NO LIGHT on
: Saying the vehicle’s battery maybe damaged, after confirming the clamps
connection is correct, press the “BOOST” button, wait GREEN LIGHT is on, and then turn on the
eng1ne w1th1n 30s.
RED LIGHT
and
GREEN
light blinking
: Saying the host goes to Protection Situation after 4 times
continuously start, wait far 10 minutes then turn on the engine. If it still can not start the car,
please consult Professional persons, NOT make jump-start again.
