Note: when unfolding, do not pull the frame hardly for fear of damaging the parts. Don’t hold the
seat tubes with fingers to avoid injuring your fingers when pushing down the seat upholstery.
2.2 Folding
First turn over both the footplates, lift up both sides of the seat upholstery lightly with hands, and
then it can be folded. (Figure 4)
2.3 Adjust the footplate
First loosen the locknut with the spanner, pull down the slide tube and adjust the footplate to a
proper position, and then lock and fix the bolts with the spanner in a clockwise direction. (Figure 5)
(5)
2.4 Method of promoting the wheelchair by oneself
(6)
The user sits on the wheelchair stably, and then holds the hand rims of the rear wheels with both
hands. At the same time promote the wheelchair by a balanced force with both hands to make it
move forward, release the hands. When the wheelchair slow down and needs to be operated once
again after traveling for some distance, repeat these steps as mentioned above. (Figure 6)
2.5 Use of the brakes
The user holds the brake handles with both hands when the wheelchair stops, and then moves the
brake handles forward to self-locking condition, to make the rear wheels stop completely to keep
still. The process for braking is completed. (Figure 7)
(7) (8)
2.6 Operation method of cross the obstacles
In case of coming across with obstacles, the accompany should cinch the handle with both hands,
trample the end of tube of the wheelchair, lean back the wheelchair to lift the front castor, then
cross the obstacles. (Figure 8)
2.7 The knocked-down method of flip back armrest (fixed armrest is excluded)
When detaching the armrest, first press the armrest fastener with one hand to separate it from the
front bracket of seat tube, then you can flip it back. When assembling the armrest, make the armrest
fastener aim at the position of the front bracket of the seat tube and press lightly to self-locking
fastener. (Figure 9)
2.8 Tthe knocked-down method of detachable legrest ( fixed legrest is excluded)
When assembling the legrest, you should first aim the up and down positioning holes at the up and
down fixed pins, hang the legrest and then circumvolve the legrest to the spring from outside to
