© Intatec Ltd 2017
20
Installing the Riser Rail
Drill the two 6mm diameter hole and fix the upper wall clip to the wall. The wall bracket clips
should both have the same orientation.
If the wall is not vertical the spacer (9) can be used with either the upper or lower wall bracket
clip to ensure the riser rail is vertical.
The lower wall bracket (3) should be fixed to the riser rail (1) using the 2 wall bracket
screws (5) ensuring that the position of the bracket suits the centre position of the 2 wall bracket
clips (2).
Position the upper wall bracket onto the riser rail, this bracket can slide on the riser rail.
Clip the assembled rail into place by lowering it down wards on to the 2 wall bracket clips.
Assemble the end caps (6) into the ends of the rail.
Ensure the sealing washers are inserted into both ends of the flexible hose and connect the hose
to the shower valve and the handset (10).
Turn on the shower valve and check joints for leakage.
