background image

ENGLISH

 

 

 

Quick Installation Guide 

MRX LTE 

 

 

www.insys-icom.com 

Configuration as Internet Router 

12.  In Menu Help > Wizards: 

 Select Startup Wizard 

13.  Select Internet access via Cellular network 

(refer to inline help for WAN over 
Ethernet) 

14.  Enter PIN of the SIM card 
15.  Enter User name and Password for 

authentication with the provider (must not 
be empty) 

16.  Enter Access Point Name (APN) 

 

These data can be found in the contract 
documents of your SIM card or can be 
requested from the provider. The APNs of 
popular providers can be displayed by 
clinging on

 

17.  Enter IP address of the local application 

network 

18.  Click on 

Execute wizard

 

 

If the router is to be configured for the  

icom Connectivity Suite - VPN

 

(https://connectivity.insys-icom.de), select icom Connectivity Suite - VPN under VPN 
connection and enter Customer name and Device code. Then, the IP address in the 
local network will be assigned by the icom Connectivity Suite - VPN. 

 

The WAN LED flashes 

green

 during connection establishment; as soon as an Internet 

connection has been established, it is illuminated 

green

 and the Signal LED flashes 

orange

 

Configuration of access data 

 

User name and password for web interface access of the existing user in the default 
settings must be changed to prevent a manipulation of the configuration by 
unauthorised persons. 

19.  Menu Administration > Users: Enter or change User name and Password and select 

User group "Read/Write" 

20.  Store settings in profile with 

Save settings

 and activate profile with

 

 

A typo during entering or forgetting the configured access data require a reset to 
default settings to be able to access the router again. 

 

All essential configuration steps are completed with this. Further configuration depends on 
your specific application. Other frequently required settings are available on the following 
page. 

Summary of Contents for MRX3 LTE

Page 1: ...on in machines or systems in explosive atmospheres Controlling switching and data transmission of machines which may involve risks to life and limb due to their functions or when a breakdown occurs Technical Boundaries Max line length for antennas power supplies serial interfaces inputs and outputs as well as other signals 30 m Max line length of USB connection lines 3 m Cable cross section 0 25 1...

Page 2: ...4 TCP IP and Properties Enable DHCP client 9 Obtain an IP address automatically It is recommended to unplug the network cable briefly and plug it again upon activation of the DHCP client Configure a static IP address Use the following IP address example IP address 192 168 1 2 Subnet mask 255 255 255 0 Standard gateway 192 168 1 1 Preferred DNS server 192 168 1 1 Please note the previous values bef...

Page 3: ...mer name and Device code Then the IP address in the local network will be assigned by the icom Connectivity Suite VPN The WAN LED flashes green during connection establishment as soon as an Internet connection has been established it is illuminated green and the Signal LED flashes orange E Configuration of access data User name and password for web interface access of the existing user in the defa...

Page 4: ...ation Reset 2 Click on Reboot device now Alternatively press reset key on the device front once for a short time soft reset Resetting the router to default settings If the router is to be reset to default settings it can be reset to delivery state 1 Menu Administration Reset check all options 2 Click on Reset now Alternatively press reset key on the device front three times for a short time within...

Reviews: