ENGLISH
Quick Installation Guide
MRX LAN
www.insys-icom.com
These short operating instructions apply for the following devices of INSYS icom:
▪
MRX3 LAN
▪
MRX5 LAN
www.insys-icom.com/manual
It is intended for a quick commissioning by the operator. Refer to the associated manual for further information.
This and other associated manuals can be found on our website in the menu Support and Downloads >
Documentation. Scan the QR code above or enter the URL into your web browser.
Tec hnical Data
The product is only intended for the use within the permissible technical limits specified in the data sheets. These limits must be observed.
Operating voltage (redundant)
12
V … 24
V DC (±20%)
Real-time clock (RTC) buffer time
typ. 2 days
Power consumption
typ. 2.0 W, max. 3.0 W
fully equipped: max. 20 W
Temperature range
-30
°C … 70
°C
(75 °C extended)
Level input IN1
HIGH level = 2 ... 24 V
LOW level = 0 ... 1 V
Contact open condition: HIGH
Maximum permissible humidity
95% non-condensing
Current consumption input IN1
at LOW potential
typ. 0.1 mA when connecting to
GND
IP rating
Housing IP40
Level input IN2
HIGH level = 10 ... 24 V
LOW level = 0 ... 5 V
Contact open condition: LOW
Power consumption input IN2
at HIGH potential
max. 3 mA at 24 V DC
Tec hnical Boundaries
Max. line length for antennas, power supplies, serial interfaces, inputs and outputs as well as other signals: 30 m
Max. line length of USB connection lines: 3 m
Cable cross-
section: 0.25 … 1.5 (2.5) mm²
(depending on terminal size), flexible lines require end sleeves
Su pport
If you need further support, please contact your sales partner or INSYS icom support. You can contact our support department via e-mail
under [email protected].
Defects liability terms
A use other than the intended use, an ignorance of the safety instructions and the documentation, the use of insufficiently qualified
personnel as well as unauthorised modifications exclude the liability of the manufacturer for damages resulting from this. The liability of the
manufacturer ceases to exist.
Int ended Use
The product may only be used for the purposes specified in the function overview of the manual. In addition, it may be used f or the
following purposes:
▪
Usage and mounting in an industrial cabinet.
▪
Switching and data transmission functions in machines according to the machine directive 2006/42/EC.
▪
Usage as data transmission device, e.g. for a PLC.
The product may not be used for the following purposes and used or operated under the following conditions:
▪
Use, control, switching and data transmission in machines or systems in explosive atmospheres.
▪
Controlling, switching and data transmission of machines, which may involve risks to life and limb due to their functions or when a
breakdown occurs.
