ENGLISH
Quick Installation Guide
EBW-E
www.insys-icom.com
D
Integration into a network (LAN (ext))
If the router is in delivery state or has been reset to factory defaults, the configuration
option Fast start after reset to default settings appears upon login.
10.
Activate PPPoE connection
, if a DSL
connection is to be configured and enter
respective user name and password
OR
Activate DHCP client
, if a DHCP server
is active
OR
Set static IP address
and enter IP address and netmask of the
existing network as well as default
gateway address and first DNS server
address
Customer name and device code must only be entered, if the router is to be configured
for the
icom Connectivity Suite - VPN
(https://connectivity.insys-icom.de).
11. Confirm settings with OK
The COM LED is illuminated
green
during PPPoE connection establishment and
orange
as soon as a connection is established.
If a connection to the
icom Connectivity Suite - VPN
is configured, the Status LED
will light up
green
as soon as it is established.
E
Configuration of access data
User name and password for web interface access must be changed to prevent a
manipulation of the configuration by unauthorised persons.
12. Menu Basic Settings > Web interface: Enter user name and password for
authentication with password
13. Confirm settings with OK
A typo during entering or forgetting the configured access data makes the router
inaccessible until resetting it to default settings.
All essential configuration steps are completed with this. Further configuration depends on
your specific application. Other frequently required settings are available on the following
page.
