6
InStyler
®
Rotating Iron
Safety First
Using your Thermal Guard
NOTE: It is recommended that you use your InStyler with the in-
cluded Thermal Guard Training Aid, to help prevent burns while you
are getting used to this unique new hot styling tool.
Attaching Your Thermal Guard Training Aid
1. Before attaching the Thermal Guard make sure the barrel of the
unit is cool to touch.
2.
To attach, snap the Thermal Guard Training Aid onto the side of
the unit directly under the ring below the barrel.
3.
Rotate the Thermal Guard Training Aid until tabs are seated in the
indentations on the body of the InStyler, and the Thermal Guard
Training Aid is facing out.
4. Once it is snapped in place, you can use your InStyler as you nor-
mally would.
Removing Your Thermal Guard Training Aid
5. Before removing Thermal Guard make sure the barrel of the unit is
cool to touch.
6.
To remove the Thermal Guard Training Aid, firmly grab the Ther-
mal Guard Training Aid, making sure the barrel of the unit is cool,
twist
to unseat it and pull to remove.
NOTE:
It is important to keep your InStyler clean, as hair product
build-up can accumulate on the barrel and bristles. With the unit
unplugged, wipe the outside surface only with a lightly damp cloth.
Bristles can be lightly scrubbed if necessary. Make sure the InStyler
is completely dry before plugging into any power source. Please see
page 15 of this manual for more detailed instructions on cleaning.
*Always allow the InStyler to cool before storing.
Attach around the neck of
the barrel side as shown.
Rotate 90 degrees until
snaps secure into place.
