6
Safety First -
Using your Thermal Guard
NOTE: It is recommended that you use your InStyler with the included
Thermal Guard Training Aid, to help prevent burns while you are getting
used to this unique new hot styling tool.
Attaching Your Thermal Guard Training Aid
1.
To attach, snap the Thermal Guard Training Aid onto the side of the unit directly under the
ring below the barrel.
2.
Rotate the Thermal Guard Training Aid until tabs are seated in the indentations on the body
of the InStyler, and the Thermal Guard Training Aid is facing out.
3. Once it is snapped in place, you can use your InStyler as you normally would.
Removing Your Thermal Guard Training Aid
4.
To remove the Thermal Guard Training Aid, firmly grab the Thermal Guard Training Aid,
making sure the barrel of the unit is cool,
twist
to unseat it and pull to remove.
5.
Allow the InStyler to cool before storing.
It’s that simple!
NOTE: It is important to keep your InStyler clean, as hair product build-up can accumulate
on the barrel and bristles. With the unit unplugged, wipe the outside surface only with a
lightly damp cloth. Bristles can be lightly scrubbed if necessary. Make sure the InStyler is
completely dry before plugging into any power source. Please see page 15 of this manual
for more detailed instructions on cleaning.
¾ in.
(19mm)
InStyler Rotating Iron
