GROUND FAULT CIRCUIT INTERRUPTERS (GFCI)
If you must use appliance in the bathroom, install a GFCI now. A GFCI is a
sensitive device which reacts immediately to a small electric current leak by
stopping the electricity flow. Your local electrician can help you decide which
type is best for you – a portable unit that plugs into the electrical outlet or
permanent unit installed by your electrician. The national electrical code now
requires GFCI’s in bathrooms, garages and outdoor outlets of all new homes.
WHY DO YOU NEED A GFCI?
Electricity and water don’t mix. If your appliance falls into water while plugged
in, the electric shock can kill you. Even if the switch is “OFF”. A regular fuse or
circuit breaker won’t protect you under these circumstances. A GFCI offers far
greater protection.
APPLIANCE LEAKAGE CIRCUIT INTERRUPTER (ALCI)
The appliance is provided with an ALCI. This safety feature renders the tool
inoperable under some abnormal conditions, such as accidental immersion in
water. Check the ALCI safety feature every time you use the appliance.
To make sure the ALCI is functioning properly and the exclusive water
sensing system is working, perform the following test:
USER MAINTENANCE INSTRUCTIONS
Never block or clog air intakes, as this will cause the appliance to overheat. The
appliance has no user serviceable parts. Any servicing should be performed by
an authorized service representative or a professional center. Never allow the
power cord to be twisted, pulled, bent, or wrapped around the appliance. If
the cord is twisted, untwist the cord before use. When not in use, the appliance
should be stored in a safe, dry place, out of children’s reach.
Model No. 00682
Part ID: PKG-MANUAL-ISHBA-1801
Voltage: 125VAC/60Hz
Power: 600W
©2018 Tré Milano, LLC. All Rights Reserved. InStyler® and the InStyler logo are
trademarks of Trade Box, LLC.
1. Plug in the appliance and press
the TEST button on plug.
2. The appliance will stop
functioning. There will be an
audible click and the RESET
button will pop out.
3. To reset the ALCI with a RESET
button, first unplug unit. Then
push RESET button in and
reinsert into outlet.
4. Be sure to repeat TEST every
time you use the appliance to
confirm the ALCI is operational.
5. If the ALCI is not functioning
properly, return the appliance
to the nearest customer service
center.
6. If a water immersion occurs,
contact the manufacturer.
