28
Control Path:
•
Set the
AC/DC Coupled Toggle
to its left position, so that AC
coupled FM operation is selected.
•
Set the
Signal Router Toggle
to its left position, so that the incoming
signal at the
FM Input
is clipped and routed to the
Hard Sync Input
.
•
Press the sub button of Cš-L so that it illuminates white and the
square wave is one octave below the stepped triangle waveform.
•
Connect the sub square output of Cš-L to the
FM Input
of
neóni
and
set the
FM Attenuator
fully clockwise. The sub square waveform
is now through-zero frequency modulating and hard
synchronizing
neóni
.
•
Connect the 1V/Oct output of a keyboard or sequencer to the
1V/
Oct Inputs
of
neóni
and Cš-L.
•
Connect the gate output of the sequencer or keyboard to the trigger
input of cèis.
•
Connect the CV output of cèis to a multiple.
•
Connect one copy of cèis’s CV signal to the CV input of I-ō47 and
set the corresponding CV attenuator to 2:00.
•
Connect a second copy of cèis’s CV signal to the bottom channel
CV input of vincâ.
•
Set the gate/trig toggle of cèis to its down position.
•
Set the shape knob of cèis to 3:30.
•
Set the individual stages of cèis (attack to its minimum position,
decay to 20%, sustain to 20%, and release to 30%).
This device meets the requirements of the following standards: EN55032,
EN55103-2, EN61000-3-2, EN61000-3-3, EN62311.
Manual Author: Collin Russell
Manual Design: Dominic D’Sylva
