visualized with the UI LEDs in a clockwise circle animation,
starting from the top. Note: LED mode (Button B) has to be in
m-l (MIDI to Light) mode for CC visualization.
Default: Off
CC Slew Limiter
If enabled, the outgoing MIDI Control Change value is
smoothed.
Default: Off
Slew Limit
Sets the slew rate. The higher the slider value, the higher the
smoothing of the outgoing CC value.
Default: 98%
Light Sensor
Automatic
Brightness
Adaption
If enabled, the minimum and maximum measured brightness
corresponds to full scale input brightness range. Thus, the
brightness limits are dynamically adapted to the environment.
Default: On
Brightness Range Corresponds to the fixed input brightness range.
Default: 0% - 50%
Sensitivity
Configures the sensitivity of the light sensor (i.e. integration
time). Note: The sensitivity parameter affects the latency. The
higher the sensitivity, the higher the latency.
Default: 25%
Random Mode
Level of
Randomness
If IO-Lights is not synchronized to an external clock, this
parameter controls the time variation between two random LED
states. The level of randomness parameter affects the average
time and its variance. The higher the randomness, the lower the
average time and variance.
Default: 60%
Number Active
Corresponds to number of active LEDs. If set to 0, the number
