Instron AutoX, Operator'S Manual

Page: 33 / 60

33
Setting up the AutoX for Flexure Testing
Product Support: www.instron.com
Moving the AutoX into and out of the Test Space
Electromechanical Frame Mounting
When not in use the AutoX is stored behind the frame. The sliding assembly is in the
unlocked position, with the handles on the sliding assembly in the vertical position.
To move the AutoX into the test space:
1. Standing in front of the frame, use the handles to pull the sliding assembly toward
you until you feel it hit a stop.
2. Continue pulling gently on the handles to compress the spring and rotate the
handles inwards (as shown in
Figure 10
on page 33 ) to lock the sliding assembly in
place.
To move the AutoX out of the test space:
1. Use the handles to pull the arms gently towards you and rotate the handles back to
the vertical position.
2. Push the sliding assembly back to the rear of the frame.
Figure 10. Operating the Sliding Assembly (Electromechanical Frame Mounting)