Instron 34FM-100, Preinstallation Manual

Page: 51 / 76

51 Product Support: www.instron.com
Chapter 4
Risk reduction and safe use
•
Residual risks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
•
Operator Protection Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
This chapter is a copy of a chapter taken from the Operator’s Guide that will be supplied
with your system. It describes:
•
risks associated with use of your testing system
•
how to use the features of the testing system to minimize those risks
•
accessories that you can purchase to minimize risks if your risk assessment
indicates that they are necessary, for example:
•
interlocked shield
•
specimen insertion tool
Residual risks
The equipment described in this documentation is designed with features to reduce the
risk of injury to an operator. There are, however, always residual risks in the use of this
equipment, influenced by:
•
the test application
•
the design of the test method or procedure
•
the jog, return and test speeds used
•
the type of specimen being tested
•
the size of the specimen being tested
•
the design of grips and test fixtures
•
the experience of the operator using the equipment
It is our strong recommendation, therefore, that you carry out your own risk assessment
for your particular equipment setup and testing application.